website statistics


FULL FLOW RECIRCULATION option for the latest John Deere ExactApply Pulse Width Modulated System, and more recently for Aim Command equipped Case Patriot sprayers.


Distributed in Australia and Canada by Fantastic Nozzles & NOZZLES.ONLINE


arag logo.jpg

2020 BRS Spray Mode.png

The Arag Boom Recirculation System allows the boom to be plumbed in a single boom line recirculation configuration. This allows the flow to travel through the boom and back to the tank when not spraying.

  • Pressurise/prime spray line on way to job,
    • That means instant ON, for an immediate fully dispersed spray pattern.
  • Flush boom lines to tank or to ground (safe disposal),
    • That gives you dual options for drainage and disposal.
  • Prevent particles settling in boom lines or tank,
    • Well, that's stating the obvious ;)
  • Hygienic contamination prevention.
    • This you can calculate precisely against the cost of the first few hectares of a damaged crop!

ARAG BRS is suited to all Individual Nozzle Control systems including JD Exact Apply and Case Patriot Aim Command.


Recirculation for JD and Patriot!

  • The systems are enabled by replacing the boom section end fittings with a specially engineered adapters allowing the connection of all of the sections into a single (common rail) line.
  • Switch between Spray and Recirculation modes with a single in cab switch. 
  • Flushing to ground (safe disposal), is done with a simple manual, ball valve.


Manual boom section flush for JD

Using the same stainless steel component to replace the JD aspirator as on the recirculation system, add elbow, T Fork fittings and ARAG flush valves.


2020 BRS Recirculation Mode.png


The ARAG Boom Recirculation System is is a very neat factory looking installation, with the best features being the simple ON/OFF (Spray or Recirculate) operation and that NO INTEGRATION is required with JD's onboard electronics!

ARAG Boom Recirculation System.jpeg