website statistics

VISIO Tank Level & Fill Control Systems

Second Tank Level Sensor for VISIO $990.00

Yes+ $175.00
Yes+ $89.00
*

For adding a second tank to your VISIO Tank Level Monitor.

  • Requires a dual sensor harness for VISIO (Usually supplied with your first VISIO to facilitate flow meter calibration)
  • Requires latest software upgrade V2.6.0. Download link and instructions below.

 

DOWNLOAD SOFTWARE

This update can be used by Visio owners, the new version contains the Pump Stop Control for Minimum Tank Level and the 2 Tank Level options.

Instructions below

#NOTE, with this upgrade your VISIO can be SWITCHED BETWEEN two tank monitoring mode OR single tank fill control and calibration mode. 

Technical Features

UPGRADE INSTRUCTIONS
 
DOWNLOAD SOFTWARE - Link above.
 
 
Copy and/or unzip to USB drive.

With Visio switch OFF, insert USB and switch ON.

Select OK to upgrade.

Followup setup prompts on the Visio Screen.

Select Operating Mode: eg.2 Tank Level  is available,  

If no Tank Profile then set Operating mode to Fill Control (L)

 

Connect Tank Level sensor for Tank 1 to Sensor plug and the flowmeter to the sensor 2 plug on the Visio double sensor harness.

 

Auto Calibrate the Tank level sensor

Save to profile to USB, rename Tank profile on a PC/Laptop using file explorer, eg Tank 1

Auto calibrate the Tank Level sensor for Tank 2

Save to profile to USB, rename Tank profile on a PC/Laptop using file explorer, eg Tank 2.

Set Operating mode back to “2 Tank Level” and then load the profile from USB into each Tank (Tank 1 and Tank 2).

 

OTHER PRODUCTS IN THIS SECTION

 
ARAG Components, ARAG Systems

Second Tank Level Sensor for VISIO $990.00

 
 
 

Return to ARAG VISIO Systems

Return to ALL ARAG Systems

HOME